Problems | N4BC

Software stories …

I’m still trying to get Win4Icom interfaced with N1MM. I’m close … I can’t get the WinKeyer USB working properly … I think it may be a port conflict, but a bit more study and experimenting is required.

I’ve got JS8Call working OK. That was pretty simple. All I had to do was install a pair of virtual ports with com0com and it worked the first try. It’s still difficult to make a contact, though, with so few users. Unless you catch them on the air, there are long periods of no activity. The mode is still in development and users haven’t reached a critical mass yet.

I went to the SKYWARN class last night. It was interesting … a lot of it came back to me from years ago when I was a pilot and had to learn it for my license, but I did pick up some new things, too. There was a good crowd … probably about twenty people. There were military, CERT, hams, old folks, young folks, in-between folks … just a good cross-section of the population. Maybe the tornadoes we had when the remnants of Michael passed last week spurred attendance?

My shack is getting to the point where I can’t find anything without tearing everything apart. I’ve got stuff on top of stuff. I think this weekend, there’ll have to be a reckoning with stuff!

73 de Dick N4BC

Fail!

Last night was a failure for the Tidewater DMR Net. Not that it was our fault … I think I can lay this one right on the doorstep of the network. There were lots of network dropouts, weird noises, and just general failure. I never did get checked in and all of the stations I heard intermittently were having trouble communicating. This brought home … in an obvious way … that in a disaster, like a hurricane and the resulting flooding, those of us dependent on hotspots and the internet for DMR operation would literally be “up the creek without a paddle.” There’s still a real need for that good ol’ RF!

73 de Dick N4BC

Pi-Star Update/Upgrade On My Hotspot

I discovered something about Pi-Star upgrading. The documentation was good … I just didn’t pay attention to it!

After I did an upgrade, I noticed I was not at the latest revision. Huh? I just did an upgrade, didn’t I? So what did I do wrong? I ran it again … the revision number incremented by one. Click again on Update and it ratcheted up one more. All in all, I clicked 4 or 5 times until it told me I was at the latest revision.

So … the upgrades are not cumulative. You have to go through them all, one by one, until you reach the latest. It DOES say in the documentation that you may have to press update more than once. Moral of this story … read the instructions! I thought I was current but …

73 de Dick N4BC

Configuring the IC-7300

I was determined to get the external Spectrum Display function of the IC-7300 working with N1MM+. I’d tried before, but had issues. For the external display to work, you need to set the baud rate to 115200, and the fastest I can get WSJT-X to run with the IC-7300 is 9600. Any faster, and it loses sync with the radio.

The solution was actually simple … I can run WSJT-X just fine with the “baseline” configuration I have saved on the SD card, so I created another file with the N1MM+ settings saved. Now, when I want to do the contest thing and want to have a big spectrum display, I load that file. When I’m done and am ready to go back to “normal” operation, I load the baseline file. Hey, it works! I know I’m missing something, but … .

I also updated my Pi-Star software on my hotspot and activated the D-Star functionality as well, in anticipation of the arrival of the new ID-51A Plus 2. I’ve been doing a lot of reading about D-Star when I have a chance, and I think I’ve got a fair understanding about operating and programming now. Thank goodness for the internet!

It was a pretty sparse crowd for the DMR net last night. Only four of us showed up, but it was still OK. We talked a bit about the new mobile interface that someone has written for Pi-Star. I think it runs in a browser or maybe it’s an app, but anyway, Howard, WZ4K, is planning on trying it out this week. We should have a blow-by-blow description for the next net meeting!

The button battery in my MFJ clock died, so I was off to the drugstore to find a replacement. Of course, they had a different brand, which means a different part number. The internet on the smartphone helped me there too, but of course, they didn’t have the one I needed. I’ll try another place tomorrow.

I’ve been doing a bit of FT-8 after work and picked up a new country. I caught 9G5AR in Ghana calling CQ and pounced. I’ve got him in the log and now I just have to wait for the LOTW confirmation. I also saw a station in Bahrain, but couldn’t connect with him. This was on twenty meters, so the DX is out there. You’ve just got to be in the right place at the right time. I also worked a bunch of other stations 40,30,20,17, and 15 meters, too.

Well, the XYL just reminded me that we have a birthday party to go to tomorrow that I had completely forgotten about, so there went my weekend plans. Gotta be fast and think on your feet around this house.

See you on the bands!

73 de Dick N4BC

A Few Contacts, but …

I did a bit of FT8 yesterday evening. I managed one contact on 80M and three on 15M. The other bands were sounding good, but I just couldn’t seem to connect. Not a real dense map either … nothing showing anywhere except North America, and one reception report in Venezuela.

I did have an equipment problem surface, though. My USB hub kept dropping out or resetting. Wiggling the USB-A connector at the laptop duplicated the problem. Over time, with connecting and disconnecting, the plug has gotten worn and is loose. At least, I hope it’s the plug and not the laptop socket that’s worn. I looked for a replacement cord, but the hub end is a USB-B connector … like you find on most printers … sort of a square plug, rather than a rectangular one. Ah well, Amazon Basics … should be here Friday. Love Amazon Prime! The old one is still usable … I just have to make sure I don’t wiggle the cord, though.

I’m looking forward to the loooong Thanksgiving holiday. Hopefully, conditions will improve a bit. I’ve been reading a bit about Olivia and want to give that a try. Maybe I’ll also have a chance to do some antenna experimenting, too. We’ll see.

Right now, I need to find a plumber. The kitchen sink decided to plug up on Thanksgiving eve, when the kitchen is a beehive of activity. Figures …

Have a great holiday if you’re celebrating it!

73 de Dick N4BC
November Four Big Cheese