Computer Crashes and Antennas

I spent a bit of time last night working the various QSO parties (IN, NE, 7QP) and had a pretty good time. N1MM kept crashing the computer, and I couldn’t figure out what had changed since I last used it. I was using the FT-450 hardware file for my FT-450D, and had had the occasional crash before, but it was getting worse, so I decided to try the FT-950 file. Night & day, folks. I haven’t had a crash since I changed, and everything seems to work OK. I guess the FT-450D is a lot more like the FT-950, since they are both SDR digital DSP boxes. I’m not sure how the FT-450 is different in how the computer sees it.

I want to say a couple of words about the W1SFR End-Fed 40 – 6 m Antenna that I bought from Steve at kx3helper.com and used for the first time last weekend. This is a quality product and Steve really stands behind what he sells. Just because the website says kx3helper, there’s plenty there that’s useful for other small portable rigs, too. Yeah, sure … I could have built the matching network in a box myself and cut some wire and had something functionally equivalent, but what I didn’t spend was TIME. Between work, family, scouting, and church, I don’t have a lot of time. I treasure the (too few) moments that I have to myself to do ME things (like ham radio). To me, it’s worth buying it ready to go. Visit Steve’s site and see what he has to offer, especially if you like portable operation.

Well, that’s about it for now. 72 and 73 de Dick K4FTW

Hammin’ in the Woods

Operating has been pretty spotty lately. I’ve just been so busy with other things that radio has had to take a back seat. I have worked a few of the W1AW/x stations, but not much else.

This weekend, though, I did get on the air in a different manner. I am also a Scout leader, so I took all of my portable gear with me on a weekend camping trip into the woods. I wanted to expose the kids to ham radio, and gauge the interest for participation in the Radio Merit Badge.

This was really the first weekend I’ve had the time (and the decent weather) to get out and do some portable operation. This past winter was too nasty for me to trek to the woods and do ham radio!

I had the Ten-Tec R4040 QRP transceiver, the ZM-2 tuner, and a 40-6 Meter End Fed antenna with 9:1 balun from Steve at kx3helper.com, along with the assorted odds and ends needed to connect everything. The antenna was up in a “L” configuration, no more than 20 feet high at its highest point.

I powered up everything from a 12V 7AH battery, tuned up, and got on the air. The Florida QSO Party was going, and the signals were pretty good. I answered a few stations and they came right back to me. I was impressed. I was even more impressed when I noticed I’d made quite a few QSOs with the ZM-2 in the TUNE position … I wasn’t even connected to the antenna! I flipped the switch, and the results were much better!

This was the first “Field Test” of the entire setup and I was duly impressed. Everything worked just like it was supposed to, and I had several of the boys (and adults) interested in learning more. It was really a great weekend in all respects.

73 de Dick K4FTW

Antennas and One and Zeros

Digital modes are addictive. I’ve worked several days now of JT-9 and JT-65 and managed to pick up a few new states that had been elusive in the past. I tried a couple of different software programs and settled on WSJT-X with JT-Alert and linked everything to my DXLab software.

I was noticing a few tuning issues on my vertical antenna, so I finally went out to the back yard and checked it. It’s a 31-ft wire on a Jackite collapsible fiberglass pole and one of the sections had collapsed. I had a wire tie at each joint to keep that from happening, but I guess this one was not snug enough or had slipped. Anyway, to make a long story short, I re-extended the pole section and twisted it to lock it.SWR readings are back to normal now.  I’ll put another wire-tie on it when I get around to finding one :-).

Tomorrow is a Holiday — President’s Day, so maybe I’ll have a chance to get some operating accomplished. I did work a couple of stations in the ARRL International CW contest this weekend, but those don’t count as a ragchew, for sure!

73 de Dick

 

The QRP Bug

I think I got bitten by a bug last week. I’ve mentioned that I was looking at a Ten Tec Rebel 506. Well, I had access to a QRP rig and did a bit of portable “in the woods”  operating last week. Wow, what FUN! It was almost like Novice operating again. I had so much fun, it convinced me to order a rig – but not the Ten Tec 506. I looked at a lot of rigs, kits, etc., and decided that bang-for-buck, I kept returning to the Ten Tec R4040 … 4 bands, 5+ watts, and not much bigger than a QSL card (but much thicker!). I’m still assembling “stuff” and building an antenna and hope to get it on the air from the boonies this weekend. I will hook it up to my home antenna this evening and give it a checkout, though.

r4040

73 de Dick K4FTW

PA QSO Party

The Pennsylvania stations were booming in down here. Forty and eighty had some 59+ signals. I worked quite a few on Phone, and found it to be a fun experience. For every op that sounded like he was in it to win, there were lots of others that were pretty laid back and having a great time. It was a tossup as to mode — cw or phone — but it had been a while since I worked phone and there were a lot more phone stations on than cw.

I’m still working on 80 with a 40 meter antenna, and getting pretty good results, but I think it’s time to bite the bullet and upgrade the Carolina Windom to 80 meters. All it should take is more wire (and some creative ways to support the ends). I think maybe some more fiberglass poles are in my future :-).

So it’s been a pretty fun weekend, and it’s not over yet. We’ve had 5 days and nights of rain, so when that’s over and done, maybe I can work on that antenna. I’m still looking at a Ten Tec Rebel 506, and eventually I should be able to convince myself I really need it :-). The open design and qrp operation do intrigue me though. We’ll see.

73 de Dick K4FTW